Infotech & Security System


Laptop Repair Service 

In this article, we discuss how to fix common laptop problems. Most of the problems can be solved at home. Here we have provided the main problem that laptop users may experience.

[su_divider top=”no”]


Overheating laptops can cause many problems. If your laptop is continuously overheating, it can be very harmful for you laptop body and the internal hardware.
In that case you should clean the fan with cotton swab dipped in a drop of alcohol. Or you can also use a vacuum cleaner to remove the dirt from the graphic card.

[su_divider top=”no”]

2.Hard Drive Failure

the error “Windows detected a hard disk problem” is caused by file system error, then the issue will be fixed after chkdsk. … Bad sectors may happen to all hard drive and threat data security.

Hard drive failure is one of the most common and problems for laptop users, but it’s also one of the easiest problems to recover from. If you know that how to open laptop carefully then open it and check the connection.

the perfect solution solution is backup solution. Norton Save & Restore 2.0 is the easy way to take backup solution.

[su_divider top=”no”]

3.Laptop can’t connect to wireless network

If your laptop can’t connect to wireless network in airport, hotel, coffee shop, basement, etc. then problem is in network connection not your laptop. But your laptop can’t connect to network at your home then make sure that the network name or SSID is correct. Best  Solution this problem ascott infotech provding.

[su_divider top=”no”]

4.Laptop turns on and off repeatedly

In this case you can try reseating/replacing memory. If this solution is not working then motherboard failed and you need to replace the motherboard. and not work.

[su_divider top=”no”]

5.Laptop Won’t Boot

It is the common problem in a laptop. There are many causes for this problem for example software problem, hardware problem, etc. In this case you should check the battery and the battery light. If these solution does not solve your laptop problem then you should change the battery.

[su_divider top=”no”]